Virid-Pro 5L
$35.00
Virid-Pro is an awesome hospital grade, multi-purpose spray that cleans, disinfects, cuts grease & kills mould.
Free shipping on orders over $50!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
VIRID-PRO READY TO USE DISINFECTANT IS A HOSPITAL GRADE DISINFECTANT WHICH IS A BREAKTHROUGH IN MODERN, INNOVATIVE, CLEANING AND DISINFECTION TECHNOLOGY.
Virid-Pro is a single-step, hospital grade, ready to use disinfectant with awesome cleaning power and is effective against a wide variety of pathogenic micro-organisms including viruses, bacteria, fungi, mould and mildew.
Kills SARS-CoV-2 (COVID-19 virus)
TGA Australia Listing AUST L 354094
Powerful, single-step disinfection with unique benefits of being completely non-toxic and safe for use in food preparation environments. Safe for use on smooth and porous surfaces.
BENEFITS
- Virid-Pro – Ready To Use, has many incredible benefits which make it an increasingly popular choice in hospital grade cleaning and disinfecting situations.
- Non-toxic, Pleasant fresh fragrance.
- Safe for use in food environments.
- Outstanding cleaning power.
- Safe for use on carpets and fabrics.
- Non-corrosive and safe for use on metal surfaces.
- Leaves an active residue that will continue to be effective for hours after cleaning.
- Neutral pH.
- Kills mould.
Sophisticated Anti-microbial Blend – Virid-Pro – Ready To Use disinfectant employs a potentiated biocidal package which provides a significantly faster and wider scope of kill.
Penetration – To provide ultimate sanitization of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the biocide to penetrate faster and deeper into the inner-structure of fibre and porous substrates.
Eliminates odours – Virid-Pro – Ready To Use eliminates odours at their source by powerful anti-microbial action against odour causing germs.
Broad Spectrum of Activity – Virid-Pro – Ready To Use has lethal capacity against an extremely broad scope of microorganisms, making it the ideal product for a wide variety of applications.
Provides a Safe Working Environment – Ready To Use Disinfectant, ideal for removing or minimizing dangerous micro-organisms.
FOR FURTHER INFORMATION, CLICK THE BUTTONS BELOW!
TGA Public Summary
Australian Made
STEP 1: CLEAN AND DISINFECT
- Apply Virid-Pro solution direct to the surface or pre-moisten a clean cloth/wipe.
- Wipe over the affected area.
- Special attention should be paid to touch points.
- Allow to air dry.
- A correctly treated surface will dry in 10-15 minutes.
STEP 2: CLEAN FIRST, THEN DISINFECT
- If the surface is visibly dirty or been subject to bio-contamination by blood or body fluids, it must be cleaned first.
- If bio-contaminants are present, use Virid-Pro solution for this cleaning step.
- The surface must be rinsed with clean water and/or wiped dry.
- Once the surface is clean, then perform the disinfecting step using Virid-Pro solution using the process described above.
CLOTH TYPE
Avoid use of microfibre and cotton cloths with Virid-Pro, as they have conflicting charges to most disinfectants and can reduce its effectiveness.
Disposable cloths such as chux cloth work well and facilitate good air-drying effect.
RINSING VS WIPING VS AIR-DRYING
Surfaces which are visibly clean can be wiped dry or air dried. Air drying provides maximum disinfection and allows for residual biocide to provide longer protection. Wiping surfaces with a cloth pre-moistened with Virid-Pro, dislodges body oils and grime and provides the very best disinfection outcome.
Ensure surfaces left to air dry do not take longer than the times prescribed.
SURFACE COMPATIBILITY
When used as directed, Virid-Pro is safe on virtually all water cleanable hard surfaces.
Carpets, fabrics and leather are also treated successfully with Virid-Pro; however, it is recommended to pre-test for chemical or moisture sensitivity.
Virid-Pro is cationic in nature and can affect the stain resistance treatment on Stain master nylon carpet.
Brass & Non-ferrous metals can be affected by chemical solutions. Pretesting for chemical sensitivity is recommended. Take extra care and wipe dry. Do not allow to air dry.
Electronics can be affected by chemical solutions. Pretesting for chemical sensitivity is recommended. Do not spray directly onto electronics. Use a pre-moistened cloth.
FOOD PREPARATION AREAS
All the ingredients in Virid-Pro are classified as food safe. It is safe to use in food preparation facilities however surfaces which have direct food contact (eg cutting boards) must be rinsed with potable water in keeping with food authority guidelines.
BEST PRACTICE PROCEDURES
Consult with information from your local health authority for disinfection frequency and procedures. Recommendations made in this document stand subject to health authority instructions.
Non-touch Points
Surfaces such as walls (above 2.5m), ceilings, etc can be treated initially with Virid-Pro solution by fog or spray.
Residual biocide will remain on these surfaces indefinitely unless subjected to moisture, wiping or touching. It is therefore not necessary to frequently treat such surfaces.
Touch Points
Touch points should be treated more frequently in accord with the frequency of usage or traffic.
APPLICATION AREAS
HOSPITALS – CSSD
Stainless steel and plastic surfaces, non-therapeutic equipment, walls, floors and doors.
HOSPITALS – INTENSIVE CARE
Stainless steel and plastic surfaces, non-therapeutic equipment, walls, floors and doors.
HOSPITALS – THEATRE (EXCLUDES MEDICAL DEVICES)
Equipment, hard surfaces, walls, floors and doors.
HOSPITALS – GENERAL
Cleaning up blood and body fluid spills, desks, chairs, benches hard surfaces & equipment, handles, trolleys etc.
AGED CARE
All hard surfaces, wheelchairs, tables, hard floors, doors, etc.
DENTAL & GP SURGERIES
All hard surfaces, chairs, trolleys, treatment tables & lights.
LABORATORIES & PATHOLOGY CLINICS
All hard surfaces, fume cupboards, benches, chairs, desks, trolleys.
GOVERNMENT
City Council, Offices, Public Areas & Toilets, mould, trauma and flood clean-up.
HOSPITALITY – GENERAL
Café, Restaurants, All hard surfaces, chairs, tables, doors, touch points, bathrooms, toilets.
IN THE HOME
ALL hard surfaces, Kitchen, walls, floors, shower, toilet, bathroom, stainless steel sinks, doors all touch points.
INDUSTRY / PUBLIC TRANSPORT
Hard surfaces, fogging applications, handles, seats, touch points.
LABEL NOTES
TGA listing requirements. Are to be read in the context of healthcare use, which is TGA’s main focus. These statements are explained below;
- Hard Surface Disinfectant Only – for hospitals this defines it as not being a product for laundry use, etc. In the restoration industry its recommended use on contaminated carpets and fibres still remains acceptable.
- Not to be used on skin – this distinguishes it from an antiseptic for wound care, etc. It is no more or less hazardous on skin. Always follow safety directions as provided.
- Not to be used on medical devices and other therapeutic devices – this statement distinguishes it from sterilants which are used for sterilising medical instruments which are used on humans such as scalpels, needles, tubes, etc.
- All non-therapeutic/medical devices surfaces are safe for disinfecting with Virid-Pro as a hospital grade disinfectant.
This includes floors, walls, trolleys, beds, tables, desks, chairs, etc.
SPECIAL USE NOTES
Do not mix VIRID-PRO with detergents or other chemicals.
- Only use clean cloths or paper towelling when applying and using Virid-Pro solution.
- Follow established cleaning code of practice procedures to avoid cross contamination.
- When spraying or fogging wear relevant PPE to protect eyes and to avoid inhalation.
- Not to be used on skin.
- The disinfectant is not to be used on medical devices or other therapeutic goods.
